System operation: If the door is not locked, and the door or trunk cover does not open within 30 seconds, the door will automatically lock, and start the alarm function.

Programming process: the following conditions to increase or replace the SKP1000 key programmer; system failure.

Steps:

The driver's side door is open and the car key is not in the ignition switch;

Insert the skp1000 car key into the ignition switch and pull out the key;

Turn off and open the driver's door twice in 40 seconds;

Close the driver's door;

Insert the car key into the ignition switch;

Turn on and off the ignition switch once, skp1000 program a new key number in a new car key, and save the old number in the car key or turn on and off the ignition switch twice so that it can be used in a new car key In the program into a new key number, at the same time delete the car keys stored in the old number;

Remove the car keys;

The door will now be automatically locked and unlocked once or twice, as to one or two depending on the mode of the vehicle key selection;

 

Complete the following car keys in 20 seconds Operation steps:

Press the lock and unlock button of the car key at the same time and keep it for 1 ~ 1.5 seconds.

Press the lock button for at least 1 second in the next 3 seconds, release the button.

The door will now be automatically by skp1000 programmer locked and unlocked once.

The door will be automatically locked and unlocked once

 to here : http://blog.xtooleshop.com/

 

Note: If the door is automatically locked and unlocked twice, the car key programming process is not fully completed. Need to re-carry the car key programming process.